parametric.s_bend_straight_coupler

s_bend_straight_coupler(
    *,
    port_spec: Annotated[str | photonforge.PortSpec, _]
    | Annotated[
        collections.abc.Sequence[Annotated[str | photonforge.PortSpec, _]],
        maxItems=2,
        minItems=2,
    ]
    | None = None,
    coupling_distance: Annotated[float, units='μm'] | None = None,
    s_bend_length: Annotated[float, exclusiveMinimum=0, units='μm']
    | None = None,
    s_bend_offset: Annotated[float, units='μm'] | None = None,
    euler_fraction: Annotated[float, maximum=1, minimum=0] | None = None,
    coupling_length: Annotated[float, minimum=0, units='μm'] | None = None,
    technology: photonforge.Technology | None = None,
    name: str | None = None,
    model: photonforge.Model | None = None,
) -> photonforge.Component

S bend/straight coupling region.

Args

• port_spec: Port specification describing waveguide cross-section. A tuple with 2 values can be used, one for each coupler side.
• coupling_distance: Distance between waveguide centers.
• s_bend_length: Length of the S bends.
• s_bend_offset: Offset of the S bends.
• euler_fraction: Fraction of the bends that is created using an Euler spiral (see Path.arc). If None, defaults to 0.
• coupling_length: Length of straight coupling region. If None, defaults to 0.
• technology: Component technology. If None, the default technology is used.
• name: Component name.
• model: Model to be used with this component. If None a DirectionalCouplerCircuitModel is used.

Returns

Coupling component.

Example

>>> component = pf.parametric.s_bend_straight_coupler(
...     port_spec="Strip",
...     coupling_distance=0.6,
...     s_bend_length=6,
...     s_bend_offset=2.5,
...     euler_fraction=0.5,
...     coupling_length=1,
... )