Slip Wall Boundary Condition

Slip Wall Boundary Condition#

The Slip Wall boundary condition allows flow to slip tangentially along a surface but not penetrate it, providing a frictionless boundary representation where shear stresses are zero.

Available Options#

Option

Description

Applicable

Assigned surfaces

Geometric boundaries to apply the slip wall condition

always

Detailed Descriptions#

Assigned surfaces#

Specifies the geometric boundaries to which the slip wall boundary condition is applied.

  • Accepted types: Surface, GhostSurface, GhostCircularPlane

Notes:

  • Can reference surfaces by name or pattern.

  • Compatible with the AutomatedFarfield feature.

Key properties#

  • Zero normal velocity (no flow through the boundary)

  • Zero shear stress (tangential velocity can vary freely)

  • No boundary layer formation

  • No viscous effects at the wall

  • Unlike a moving wall, a slip wall has no defined velocity but allows tangential flow with zero friction.

Important

Forces on slip-wall boundaries are NOT included in the total-forces or surface-forces results.

💡 Tips

Comparison with Other Boundary Types

  • Slip Wall vs. Regular Wall:

    • Slip wall: Zero shear stress, no boundary layer

    • Regular wall: No-slip condition, develops boundary layer

    • Regular wall requires fine mesh resolution near surface

  • Slip Wall vs. Symmetry:

    • Slip wall: Zero normal flow, zero shear stress

    • Symmetry: Zero normal flow, mirrored flow field

    • Symmetry enforces additional constraints on flow variables

  • Slip Wall vs. Moving Wall:

    • Slip wall: No defined velocity, allows tangential flow with zero friction

    • Moving wall: Defined velocity, enforces no-slip condition at the specified velocity

❓ Frequently Asked Questions

  • What’s the difference between a slip wall and a symmetry boundary?

    Both prevent flow crossing the boundary, but:

    • Slip wall only enforces zero normal velocity and zero shear stress

    • Symmetry enforces mirroring of all flow variables across the boundary

    • Slip wall can be applied to any surface, while symmetry is only appropriate for actual planes of symmetry

  • How does a slip wall affect aerodynamic forces?

    A slip wall:

    • Will correctly capture pressure forces

    • Will NOT capture any viscous/friction forces

    • Will typically underestimate drag (sometimes significantly)

    • May overestimate lift due to absence of boundary layer effects like separation

  • Is a slip wall the same as an Euler wall?

    Yes, a slip wall is sometimes called an Euler wall because it’s consistent with Euler equations (inviscid flow equations). Both terms refer to a frictionless wall condition.

  • Can I mix slip walls and no-slip walls in the same simulation?

    Yes, you can use slip walls for some boundaries and regular no-slip walls for others. This is common when some surfaces (like main bodies) need accurate viscous modeling while others (like far-field boundaries) don’t.

🐍 Python Example Usage

See also

Python API:

# Example of applying a slip wall boundary condition
slip_wall = fl.SlipWall(
    name="frictionless_surface",
    entities=volume_mesh["frictionless_surfaces"]
)

# Example of external aerodynamics with mixed boundary types
def create_mixed_boundaries():
    return [
        # Main body with viscous effects
        fl.Wall(
            name="main_body",
            entities=volume_mesh["body_surfaces"],
            use_wall_function=True
        ),
        # Ground plane modeled as slip wall
        fl.SlipWall(
            name="ground_plane",
            entities=volume_mesh["ground_plane"]
        ),
        # Far-field boundary
        fl.Freestream(
            name="farfield",
            entities=volume_mesh["farfield"]
        )
    ]

# Example of simplified internal flow
def create_simplified_internal_flow():
    return [
        # Main flow passage with slip walls
        fl.SlipWall(
            name="passage_walls",
            entities=volume_mesh["passage_walls"]
        ),
        # Inlet condition
        fl.Inflow(
            name="inlet",
            entities=volume_mesh["inlet"],
            total_temperature=300 * fl.u.K,
            spec=fl.TotalPressure(
                value=150000 * fl.u.Pa,
                velocity_direction=(1, 0, 0)
            )
        ),
        # Outlet condition
        fl.Outflow(
            name="outlet",
            entities=volume_mesh["outlet"],
            spec=fl.Pressure(value=101325 * fl.u.Pa)
        )
    ]
Contents