flex_rf.tidy3d.LumpedResistor
Type: class │ Base(s): RectangularLumpedElement
Description
Section titled “Description”Class representing a rectangular lumped resistor. Lumped resistors are appended to the list
of structures in the simulation as Medium2D with the appropriate conductivity given
their size and voltage axis.
Parameters
Section titled “Parameters”size [TracedSize] |
|
Size in x, y, and z directions. |
name [str] |
|
Unique name for the lumped element. |
voltage_axis [Axis] |
|
Specifies the axis along which the component is oriented and along which the associated voltage drop will occur. Must be in the plane of the element. |
resistance [PositiveFloat] |
|
Resistance value in ohms. |
center [TracedCoordinate] = (0.0, 0.0, 0.0) |
|
Center of object in x, y, and z. |
num_grid_cells [PositiveInt | None] = DEFAULT_LUMPED_ELEMENT_NUM_CELLS |
|
Number of mesh grid cells associated with the lumped element along each direction. Used in generating the suggested list of |
enable_snapping_points [bool] = True |
|
When enabled, snapping points are automatically generated to snap grids to key geometric features of the lumped element for more accurate modelling. |
snap_perimeter_to_grid [bool] = True |
|
When enabled, the perimeter of the lumped element is snapped to the simulation grid, which improves accuracy when the number of grid cells is low within the element. Sides of the element perpendicular to the |
Methods
Section titled “Methods”to_structure(grid: Grid | None = None, frequency_range: FreqBound | None = None) |
|
Converts the |