Feature Compatibility Matrix

Feature Compatibility Matrix#

Legend
√ = Supported and Well Tested
O = Supported
X = Not Supported
Models Steady Simulation Unsteady Simulation Actuator Disk BET Disk BET Line SRF/MRF Porous Media User Defined Dynamics Rotating Volume Zone Conjugate Heat Transfer Aeroacoustics Turbulence Models SA (and SA-RC) SA-QCR kw-SST Kw-SST-QCR SA-AFT Kw-SST-AFT SA-DES Kw-SST-DES Meshing Automated Meshing Boundary conditions Freestream Freestream with time-dependent velocity Slip Wall No-Slip Wall Isothermal Wall Subsonic Inflow (temp, pressure) Subsonic Outflow (pressure) Subsonic Outflow (Mach) Mass Inflow Mass Outflow
Models
Steady Simulation - - X 3 X O X X -
Unsteady Simulation - - O O X O
Actuator Disk O - O O O O1 O2 O4 O X O O O O O O O O O O O O
BET Disk O O - O O O1 2 O4 O X O O O O O O O O O O O O
BET Line X O O - X O1 O2 O4 O O O O O O O O O O O
SRF/MRF X O O X - O O O X O O O O - - O X O O O O O O
Porous Media O O1 O1 O1 O - O O4 O O O O O O O O O O O O O O
User Defined Dynamics O O O O - O O O O O O O O O O O O O O
Rotating Volume Zone 3 O4 O4 O4 O4 - O O O O O O O O O O O
Conjugate Heat Transfer O O O O O O O - O O O O O O O O O O O O O O O O O O
Aeroacoustics X X X O X O O O - O O O O O O O O O O O O O O
Turbulence Models
SA (and SA-RC) - - - - - - - -
SA-QCR O O O O O O O O O - - - - - - - - O O O O O O O O O O O
Kw-SST O O O O - - - - - - - - O O O O O
Kw-SST-QCR O O O O O O O O O O O - - - - - - - - O O O O O O O O O O O
SA-AFT O O O O O O O O O - - - - - - - - O O O O O O
Kw-SST-AFT O O O O O O O O O - - - - - - - - O O O O O O O O O O O
SA-DES X O O - O O O - - - - - - - - O O O O O O
Kw-SST-DES X O O - O O O O - - - - - - - - O O O O O O
Meshing
Automated Meshing5 O O O O O O - O O O O O
Boundary conditions6
Freestream O O O - - - - - - - - - -
Freestream with time-dependent velocity X O O X O O O O O O O - - - - - - - - - -
Slip Wall O O O O O - - - - - - - - - -
No-Slip Wall O O O O O - - - - - - - - - -
Isothermal Wall O O O O O O - - - - - - - - - -
Subsonic Inflow (temp, pressure) O O O O O O O O O O O O O O O O O - - - - - - - - - -
Subsonic Outflow (pressure) O O O O O O O O O O O O O O O O O - - - - - - - - - -
Subsonic Outflow (Mach) O O O O O O O O O O O O O O O O O - - - - - - - - - -
Mass Inflow O O O O O O O O O O O O O O O O O - - - - - - - - - -
Mass Outflow O O O O O O O O O O O O O O O O O - - - - - - - - - -
Models Steady Simulation Unsteady Simulation Actuator Disk BET Disk BET Line SRF/MRF Porous Media User Defined Dynamics Rotating Volume Zone Conjugate Heat Transfer Turbulence Models SA SA-QCR kw-SST Kw-SST-QCR SA-AFT Kw-SST-AFT SA-DES Kw-SST-DES Meshing Automated Meshing Boundary conditions Freestream Freestream with time-dependent velocity Slip Wall No-Slip Wall Isothermal Wall Subsonic Inflow (temp, pressure) Subsonic Outflow (pressure) Subsonic Outflow (Mach) Mass Inflow Mass Outflow

Footnote list

1 BET/AD Disk region cannot intersect Porous media region
2 User defined dynamics only includes forces/moments from NoSlipWalls
3 Rotating volume zones will work with the steady flow solver enforcing an MRF/SRF simulation
4 Rotating volume zones are compatible with Actuator Disks, BET Disk/Line and/or Porous Media as long as the geometric region does not cross the volume zone
5 At least one NoSlipWall is required to use Automated Meshing.
6 Boundary conditions cannot intersect with sliding interfaces, porous media regions, and BET/AD regions, only valid scenario is a sliding interface at a 90° angle with a SlipWall